Cisco Firepower 1120 Donanım Kurulum Kılavuzu - Sayfa 14

Sunucu Cisco Firepower 1120 için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Cisco Firepower 1120 42 sayfaları. Connected grid router
Ayrıca Cisco Firepower 1120 için: Donanım Kurulum Kılavuzu (30 sayfalar), Kurulum Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (10 sayfalar), Manuel (6 sayfalar), Dağıtım Kılavuzu (8 sayfalar), Başlarken (42 sayfalar), Donanım Kurulum Kılavuzu (42 sayfalar)

Sayfayı Yazdır
Cisco Firepower 1120 Donanım Kurulum Kılavuzu
Rear Panel LEDs
3
SFP
Status of the SFP transceiver:
Link status (L):
• Off—No SFP.
• Amber—SFP present, but no link.
• Green, flashing—Link established and
5
Status
System operating status:
• Off—System has not booted up yet.
• Green, flashing quickly—System is booting
• Green—Normal system function.
• Amber—Critical alarm indicating one or
• Green, flashing slowly (twice in 5
• Green and amber, flashing—Cloud
• Green—Cloud disconnected.
Note
Cisco Firepower 1100 Series Hardware Installation Guide
10
transmitting.
up.
more of the following:
• Major failure of a hardware or software
component.
• Over-temperature condition.
• Power voltage outside the tolerance
range.
seconds)—Cloud connected.
Note
Cisco Defense Orchestrator
(CDO) is valid for FTD 6.7 and
later.
connection failure.
The CDO LED pattern applies to low
touch provisioning (LTP). See the
Firepower Easy Deployment Guide for
Cisco Firepower 1000 or 2100
Firewalls
for more information.
4
Power
Power supply status:
• Off —Power supply off.
• Green—Power supply on.
6
Active
Status of the failover pair:
• Off— Failover is not operational.
• Green—Failover pair operating normally.
The LED is green always unless the chassis
in a high availability pair.
• Amber—When the chassis is in a high
availability pair, the LED is amber for the
standby unit.
Overview