B2 Audio RAGE 600.4 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} B2 Audio RAGE 600.4. B2 Audio RAGE 600.4 16 pages.

Panel layout

rage2500.1

INPUT

RCA signal input for left & right channel.

A minimum of 0.1V input signal is required for correct

operation. Using only 1 input will minimize input signal

and ampli er will need to be gained as such.

POWER & PROTECTION INDICATOR

Power LED, blue light shows correct operation,

Protect LED, red light shows general malfunction, faulty

connection or thermal protection.

GAIN (4V~0.1v)

Adjusts signal input voltage from the input source

to match the ampli ers input stage.

0.1 V ~ 4 V is the operational voltage.

Voltages beyond may cause errors or damage to the

input section.

SUBSONIC

Variable subsonic setting from 10 Hz to 50 Hz.

It is highly recommended to set it according to the tuning

of your subwoofer enclosure to avoid unnecessary strain to

your sound system.

REMOTE LEVEL CONTROL PORT

Connection of external signal level control.

CAUTION, the ampli er needs to be gained in accordance

with the remote to avoid excessive signal boost.

LPF (LOW PASS FILTER 20 Hz ~200 Hz, 24 dB/oct)

Adjusts the cut o point for the low pass crossover

at the frequency chosen.

output master / input slave

Used for linking / strapping the ampli er to another unit

to achieve twice the amount of power.

When set in output master, this unit will be sending the

signal to the slave unit, that will have the switch set to

input slave with the rca connected to the input.