B2 Audio RAGE 600.4 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} B2 Audio RAGE 600.4. B2 Audio RAGE 600.4 16 pages.

Power & speaker terminal

rage2500.1

power terminal

GND (Ground connection)

Connects to the vehicle's chassis. Keep as short as

possible (< 20" / 50 cm). Use minimum 0AWG cable

for optimal operation.

rem

Connects to +12V switched remote from the headunit.

It can also use switched +12V source for external units.

If several units are installed in the car, it can be wise with

a relay to ensure su cient voltage is present.

POWER

GND

REM

12V

SPEAKER

+12v (Power connection)

Connects to the positivie terminal of the battery.

For speci ed performance 0AWG cable is required.

Fuses shall be placed within 8" / 20 cm of the battery.

speaker terminal

Connects to the speakers negative and positive terminal.

Use minimum 12 AWG speaker cable. The terminals are

bridged internally. The dual terminals are there to make

connections easier.

Keep ground as short as possible and as use the

adequate AWG to achieve optimal performance.

The minimum ohm load is 1 ohm. In strapped mode,

the ohm load is 2 ohm.