Cisco TelePresenceMCU 5300 Series Pour commencer - Page 9
Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} Cisco TelePresenceMCU 5300 Series. Cisco TelePresenceMCU 5300 Series 20 pages. Multipoint control units
Imprimer la page
Step four: Discover the IP address of the MCU
1
To display the current status of the IP address, enter:
If you have DHCP enabled on your network and you are allowing the MCU to
acquire its address using DHCP, the IP address that has been acquired by
Ethernet Port A will be shown; if you have assigned a static IP address, that is the
address that will be shown.
2
Make a note of the IP address. You will use this to access the web interface of the
unit.
Note: When your MCU has an IP address, you can add an entry for it on your DNS
server and use that host name to access the MCU's web interface.
Initial configuration
status
9