Cisco TelePresenceMCU 5300 Series 시작하기 - 페이지 9

{카테고리_이름} Cisco TelePresenceMCU 5300 Series에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresenceMCU 5300 Series 20 페이지. Multipoint control units

Step four: Discover the IP address of the MCU

To display the current status of the IP address, enter:

If you have DHCP enabled on your network and you are allowing the MCU to

acquire its address using DHCP, the IP address that has been acquired by

Ethernet Port A will be shown; if you have assigned a static IP address, that is the

address that will be shown.

Make a note of the IP address. You will use this to access the web interface of the

unit.

Note: When your MCU has an IP address, you can add an entry for it on your DNS

server and use that host name to access the MCU's web interface.

Initial configuration

status