Cisco AS5400XM Manuel d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco AS5400XM. Cisco AS5400XM 16 pages.

Connecting to the Network

Connecting to an Ethernet Network

You can connect the Cisco AS5400XM universal gateway to an Ethernet network by using a

straight-through RJ-45-to-RJ-45 Ethernet cable to connect the Gigabit Ethernet port to an Ethernet hub.

(See

To comply with the intra-building lightning surge requirements of GR-1089-CORE, Issue III, October

Caution

2002, you must use a shielded cable when connecting to either of the Cisco AS5400XM universal

gateway Ethernet ports. The cable must consist of shielded cable terminated by shielded connectors on

both ends, with the cable shield material tied to both connectors.

Figure 3-6

Connecting to a WAN

The telecommunications lines must be disconnected 1) before unplugging the main power connector

Warning

and/or 2) while the housing is open. Statement 89

Hazardous network voltages are present in WAN ports regardless of whether power to the router is

Warning

OFF or ON. To avoid electric shock, use caution when working near WAN ports. When detaching

cables, detach the end away from the router first. Statement 77

Warning

This equipment is to be installed and maintained by service personnel only as defined by AS/NZS 3260

Clause 1.2.14.3 Service Personnel. Statement 88

Cisco AS5400XM Universal Gateway Chassis Installation Guide

3-6

Figure

3-6.)

Connecting to an Ethernet Hub (10/100BASE-T Shown)

GE1 10/100/1000BASE-T port

Ethernet hub

Straight-through Ethernet cable

Chapter 3

Installing the Cisco AS5400XM Universal Gateway

OL-6418-02