Cisco ASR 9000 Series Configuration - Page 25
Parcourez en ligne ou téléchargez le pdf Configuration pour {nom_de_la_catégorie} Cisco ASR 9000 Series. Cisco ASR 9000 Series 46 pages. Line card
Également pour Cisco ASR 9000 Series : Configuration des paramètres du réseau (26 pages), Manuel de configuration (46 pages), Manuel de configuration (50 pages), Manuel (24 pages), Manuel (44 pages), Manuel de référence rapide (7 pages)
Imprimer la page
Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
Command or Action
Step 5
end
or
commit
Example:
RP/0/RSP0/CPU0:router(config-sonet)# end
or
RP/0/RSP0/CPU0:router(config-sonet)#
commit
Step 6
show aps
Example:
RP/0/RSP0/CPU0:router# show aps
Step 7
show aps group [number]
Example:
RP/0/RSP0/CPU0:router# show aps group 3
Configuring SDH AU-3
This section includes the following tasks:
•
•
Configuring SDH AU-3 Mapped to C11-T1 or C12-E1
This task explains how to configure SDH AU-3 with c11-t1 or c12-e1 mapping.
Prerequisites
•
OL-26061-03
Configuring SDH AU-3 Mapped to C11-T1 or C12-E1, page 341
Configuring SDH AU-3 Mapped to T3 or E3, page 345
You should know how to configure the SONET controller as specified in the
Clear Channel SONET Controllers"
on the Cisco ASR 9000 Series Router
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
Purpose
Saves configuration changes.
•
When you issue the end command, the system prompts you to
commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
–
Entering yes saves configuration changes to the running
configuration file, exits the configuration session, and
returns the router to EXEC mode.
Entering no exits the configuration session and returns the
–
router to EXEC mode without committing the
configuration changes.
Entering cancel leaves the router in the current
–
configuration session without exiting or committing the
configuration changes.
Use the commit command to save the configuration changes to
•
the running configuration file and remain within the
configuration session.
(Optional) Displays the operational status for all configured
SONET APS groups.
(Optional) Displays the operational status for configured SONET
APS groups.
The show aps group command is more useful than the
Note
show aps command when multiple groups are defined.
section of the
Configuring Clear Channel SONET Controllers
module.
How to Configure Channelized SONET/SDH
"How to Configure
HC-341