Cisco ASR 9000 Series Manuel de référence rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} Cisco ASR 9000 Series. Cisco ASR 9000 Series 7 pages. Line card
Également pour Cisco ASR 9000 Series : Configuration des paramètres du réseau (26 pages), Manuel de configuration (46 pages), Manuel de configuration (50 pages), Manuel (24 pages), Configuration (46 pages), Manuel (44 pages)

Imprimer la page
Cisco ASR 9000 Series Manuel de référence rapide
Cisco ASR 9000 Series
Line Card
For packaging guidelines, see Page 6
.
Package Contents
.
Foam Cushion
.
Pink Antistatic Rolled Foam
Sealed Line Card Package
Foam cushion
d
Rolled Foam
Sealed line card
package placed
c
sideways
Foam cushion
b
a
Outer packaging
box
Caution!
.
For convenience and safety purposes,
.
two persons should handle the line card.
To avoid damage, place the line card
horizontally on a flat antistatic surface.
The outer packaging box contains an
antistatic pink rolled foam that can be used
.
for this purpose.
Wear ESD gloves to unwrap the ESD
bag, and remove the line card.
© 2020 Cisco Systems, Inc. All rights reserved.
Open the seal on the outer packaging
1
box. Remove the foam cushion.
Foam cushion
Wear ESD gloves and unwrap the
4
ESD bag, which contains the line
card placed on a wooden base board.
Place the line card on an antistatic
7
surface while preparing the chassis
for card installation.
Unpacking the Line Card
Lift the inner packaging box that
2
contains the line card and place it
on a flat surface.
Unscrew the screws from the
5
plastic blocker that is on the
wooden base board.
Plastic blocker
Wooden base
board
Screw back the plastic blocker on
8
the wooden base board.
Open the seal of the inner
3
packaging box.
Remove the line card from the
6
plastic side rails of the wooden
base board.
Plastic side rails
Line card
For future use, store the packaging
9
boxes.
To repack a line card to return it, perform the
steps in the reverse order.
Follow the directions provided on the plastic
blocker for its correct orientation while
reinserting the card on the wooden base
board.
2