Cisco IOS Router Manuel de démarrage - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Cisco IOS Router. Cisco IOS Router 12 pages. Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Également pour Cisco IOS Router : Informations sur le produit (11 pages), Note d'application (41 pages)

Imprimer la page

References

Cisco IOS Basic Skills:

http://www.cisco.com/en/US/products/hw/routers/ps380/products_configuration_guide_chapter091

86a0080118cd0.html

Cabling and Setup Quick Start Guide for Cisco 800 Series Access Routers:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/85x87x/857qsg/index.htm

1 Downloading Cisco IOS IPS Files

The first step is to download IOS IPS signature package files and public crypto key from

Cisco.com. These files are required in later steps of configuration.

Step 1.1 Download the required signature files from Cisco.com to your PC.

Ensure that you have a valid Cisco.com username and password.

Cisco.com location:

Files to download:

IOS-Sxxx-CLI.pkg: Latest signature package; pick the signature package with largest

number in xxx

realm-cisco.pub.key.txt: Public crypto key

Additional Commands and References

Cisco IOS IPS Website:

http://www.cisco.com/go/iosips

2 Creating Directory on Flash

The second step is to create a directory on your router's flash where you can store the required

signature files and signature configurations.

Step 2.1 To create a directory, enter the following command at the router prompt:

mkdir <directory name>

training#mkdir ipsstore

Create directory filename [ipsstore]?

Created dir flash:ipsstore

http://www.cisco.com/cgi-bin/tablebuild.pl/ios-v5sigup

White Paper

Page 2 of 12