Cisco IOS Router Посібник для початківців - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник для початківців для Шлюз Cisco IOS Router. Cisco IOS Router 12 сторінок. Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Також для Cisco IOS Router: Інформація про продукт (11 сторінок), Примітка до заявки (41 сторінок)
Друкувати сторінку
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
References
Cisco IOS Basic Skills:
http://www.cisco.com/en/US/products/hw/routers/ps380/products_configuration_guide_chapter091
86a0080118cd0.html
Cabling and Setup Quick Start Guide for Cisco 800 Series Access Routers:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/85x87x/857qsg/index.htm
1 Downloading Cisco IOS IPS Files
The first step is to download IOS IPS signature package files and public crypto key from
Cisco.com. These files are required in later steps of configuration.
Step 1.1 Download the required signature files from Cisco.com to your PC.
Ensure that you have a valid Cisco.com username and password.
Cisco.com location:
Files to download:
IOS-Sxxx-CLI.pkg: Latest signature package; pick the signature package with largest
number in xxx
realm-cisco.pub.key.txt: Public crypto key
Additional Commands and References
Cisco IOS IPS Website:
http://www.cisco.com/go/iosips
2 Creating Directory on Flash
The second step is to create a directory on your router's flash where you can store the required
signature files and signature configurations.
Step 2.1 To create a directory, enter the following command at the router prompt:
mkdir <directory name>
training#mkdir ipsstore
Create directory filename [ipsstore]?
Created dir flash:ipsstore
http://www.cisco.com/cgi-bin/tablebuild.pl/ios-v5sigup
White Paper
Page 2 of 12