Epson Perfection V350 Series Manuel de l'utilisateur - Page 6

Epson Perfection V350 Photo

1. Make sure you have installed Epson Scan and have turned

on your computer.

2. Remove the document mat. (See page 4.)

3. Close the scanner cover.

Note:

Make sure nothing is on the document table before you close it.

4. Press and release the back of the auto film loader cover to

open it.

5. Flip out the metal film guide and press it all the way down.

6 - Epson Perfection V350 Photo

Note:

Always open the film guide whenever you use the auto film

loader, no matter how short the film strip is; otherwise, it may

cause a film jam.

6. Place a film strip into the auto film loader with its shiny

base side facing down. Your images and any wording on the

film strip should appear backwards on the side that faces up.

Slowly slide the film into the loader. Let go of the film when

the scanner begins to automatically feed it into position.

Note:

If you have difficulty inserting your

film, slightly bend the film so that it

straightens out.

Caution:

Hold the edge of the film gently or use gloves to touch the film;

otherwise you may damage the film.

When loading starts, let go of the film; otherwise, it may cause a

film jam. If the film does not feed into the auto film loader, wait 10

seconds and try again.

Do not touch the film, close the auto film loader cover, press the

5 Eject button, or open the scanner cover during scanning.

If the Status light is flashing red, film may have jammed.

When you are ready to eject your film, see the next section.

8/06