Cisco VG420 Installation

Parcourez en ligne ou téléchargez le pdf Installation pour {nom_de_la_catégorie} Cisco VG420. Cisco VG420 10 pages. Voice gateway

Installing the Cisco VG420 Voice Gateway

This chapter provides the prerequisites and the procedure for installing the Cisco VG420 Voice Gateway in

an equipment rack.

•

Prerequisites for the Installation

Before installing the device, read the safety warnings and gather the required tools and equipment. For more

information about the required tools and equipment, see the Tools and Equipment section in this hardware

installation guide.

Safety Recommendations

Warning

Statement 371 Power Cable and AC Adapter

When installing the product, use the provided or designated connection cables, power cables, AC adapters,

and batteries. Using any other cables or adapters could cause a malfunction or a fire. Electrical Appliance and

Material Safety Law prohibits the use of UL-certified cables (that have the "UL" or "CSA" shown on the

cord), not regulated with the subject law by showing "PSE" on the cord, for any other electrical devices than

products designated by Cisco.

Statement 407 Japanese Safety Instruction

You are strongly advised to read the safety instruction before using the product.

https://www.cisco.com/web/JP/techdoc/pldoc/pldoc.html

When installing the product, please use the provided or designated connection cables/power cables/AC adapters.

Prerequisites for the Installation, on page 1

Unpack the Device, on page 3

Mounting the Voice Gateway in Rack, on page 3

Chassis Grounding, on page 9

Installing the Cisco VG420 Voice Gateway