Cisco VG420 설치
{카테고리_이름} Cisco VG420에 대한 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco VG420 10 페이지. Voice gateway
Installing the Cisco VG420 Voice Gateway
This chapter provides the prerequisites and the procedure for installing the Cisco VG420 Voice Gateway in
an equipment rack.
•
•
•
•
Prerequisites for the Installation
Before installing the device, read the safety warnings and gather the required tools and equipment. For more
information about the required tools and equipment, see the Tools and Equipment section in this hardware
installation guide.
Safety Recommendations
Warning
Statement 371 Power Cable and AC Adapter
When installing the product, use the provided or designated connection cables, power cables, AC adapters,
and batteries. Using any other cables or adapters could cause a malfunction or a fire. Electrical Appliance and
Material Safety Law prohibits the use of UL-certified cables (that have the "UL" or "CSA" shown on the
cord), not regulated with the subject law by showing "PSE" on the cord, for any other electrical devices than
products designated by Cisco.
Statement 407 Japanese Safety Instruction
You are strongly advised to read the safety instruction before using the product.
https://www.cisco.com/web/JP/techdoc/pldoc/pldoc.html
When installing the product, please use the provided or designated connection cables/power cables/AC adapters.
Prerequisites for the Installation, on page 1
Unpack the Device, on page 3
Mounting the Voice Gateway in Rack, on page 3
Chassis Grounding, on page 9
Installing the Cisco VG420 Voice Gateway
1