Epson 7800 - Stylus Pro Color Inkjet Printer Manuel de déballage et d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de déballage et d'installation pour {nom_de_la_catégorie} Epson 7800 - Stylus Pro Color Inkjet Printer. Epson 7800 - Stylus Pro Color Inkjet Printer 27 pages. Stylus pro 800 series
Également pour Epson 7800 - Stylus Pro Color Inkjet Printer : Brochure & Specs (8 pages), Spécifications (4 pages), Manuel de démarrage (10 pages), Manuel de l'utilisateur (11 pages), Manuel de référence rapide (12 pages), Manuel complémentaire (1 pages), Garantie limitée (12 pages), Brochure & Specs (8 pages), Bulletin d'information sur les produits (10 pages), Brochure & Specs (16 pages), Feuille d'avis (4 pages)

Accessories:

Base bolts (4)

Strut bolts (2)

Hex socket head bolts with washers (10)

Collars (2)

Wing screws (2)

Washers (2)

Assembling the Stand

Caution:

Assembly requires two people. Be careful to

match the right and left legs (R and L is engraved

on the inner side of the base parts) and base parts.

1. Insert the right leg into the right base by

sliding the leg slot onto the base projection as

shown. Use the hex wrench to fasten the leg to

the base with 2 base bolts (H).

2. Assemble the left leg and left base in the same

3. Insert the bottom horizontal strut into the

way as step 1.

right and left bases as shown. Use the hex

wrench (G) to fasten the strut with collars (K)

and strut bolts (I).

Note:

After assembling the bases and bottom horizontal

strut, make sure that they are fastened tightly.