Epson 7800 - Stylus Pro Color Inkjet Printer Manuel de déballage et d'installation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de déballage et d'installation pour {nom_de_la_catégorie} Epson 7800 - Stylus Pro Color Inkjet Printer. Epson 7800 - Stylus Pro Color Inkjet Printer 27 pages. Stylus pro 800 series
Également pour Epson 7800 - Stylus Pro Color Inkjet Printer : Brochure & Specs (8 pages), Spécifications (4 pages), Manuel de démarrage (10 pages), Manuel de l'utilisateur (11 pages), Manuel de référence rapide (12 pages), Manuel complémentaire (1 pages), Garantie limitée (12 pages), Brochure & Specs (8 pages), Bulletin d'information sur les produits (10 pages), Brochure & Specs (16 pages), Feuille d'avis (4 pages)

Epson 7800 - Stylus Pro Color Inkjet Printer Manuel de déballage et d'installation
4. Insert the top horizontal strut into the right
and left legs. Use a screw driver to fasten the
strut with hex socket head bolts with washers
(J).
J
J
5. This completes assembly of the Stand. Make
sure each part of the Stand is tightened
securely.
Mounting the printer on the Stand
c
Caution:
Two or more people are required to mount the
printer. Hold the printer at the indicated
locations as shown. If the ink cartridges are
installed, do not tip the printer at an angle.
Otherwise, ink may leak from the cartridges.
1. Lock the two casters and extend the two
stabilizer knobs underneath the base unit.
Note:
Place the casters sideways and lock them so they
will not move.
2. Mount the printer on the printer mount as
shown.
J
3. Fasten the bottom of the printer and the
printer mount with wing screws (L) and
washers (M)
M
L
4. This completes the mounting procedure.
Make sure the printer and the Stand are
fastened together securely.
M
L
15