TomTom Mazda NB1 Manuel de référence - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de référence pour {nom_de_la_catégorie} TomTom Mazda NB1. TomTom Mazda NB1 33 pages. For mazda cx-5 2014
Également pour TomTom Mazda NB1 : Instructions sur la reconnaissance vocale (11 pages), Manuel du propriétaire (48 pages)
Read me first
Switching on and off
Your Mazda NB1 switches on when your car engine starts and switches off automatically when
you turn off your car's engine.
Until a connection has been established between the car and the Mazda NB1, the screen shows
audio-related information and the NAV button on the main display is inactive. In some situations
when you start the car, the navigation device may restart. If this happens, press the NAV button. A
black screen is shown and it make take up to 30 seconds for the main screen to appear.
Under extreme temperature conditions, the navigation device may not start. When the
temperature is within the normal range again, the device should start. If the device fails to start
automatically in this situation, stop your car engine and start the car engine again.
Note: In some situations, your navigation system may restart when turning your key in the
ignition from ACC-ON to the engine start position. If this happens, it may take up to 30 seconds
for the main screen to appear on the navigation system.
Setting up
Important: Take care to select the correct language as the language you choose will be used for
all text on the screen.
When you first switch on your device, you have to answer a few questions to set up the device.
Answer the questions by tapping the screen.
GPS reception
When you first start your Mazda NB1 navigation device, the device may need a few minutes to
determine your GPS position and show your current position on the map. In future, your position
will be found much faster, usually within a few seconds.
In areas where GPS reception is not possible, such as tunnels, your location may not be accurate.
Important: The GPS antenna is located in the dashboard so do not put objects on the dashboard.
Device not starting
In rare cases, your TomTom navigation module may not start correctly or may stop responding to
your taps. For example, if the device temperature is too high or too low, the system shuts down.
In rare circumstances, you may need to reset your navigation device. To reset your device, switch
off the car engine and then remove the memory card. Re-insert the memory card and switch the
car engine on again.
4