DIHL SB-DUAL-50L Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DIHL SB-DUAL-50L. DIHL SB-DUAL-50L 5 pages.

Cleaning

Ensure that the bin lid is cleaned regularly with a clean, dry cloth. Do not let dirt build up around the

sensor mechanism ad this will cause the sensor to stop working overtime.

Turn off and remove the lid.

Wipe inside the lid with a clean dry cloth or an antibacterial wipe, ensure the lid is dried

afterword's if using an antibacterial wipe.

Wipe the inside and outside of the bin with a clean, damp cloth.

The table below contains some common instructions you may find useful.

Note: If you have followed all steps in the manual and the issues still occur, please contact the retailer.

Fault

Lid will not open

Lid will not close fully

Lid operates slowly

Lid opens and slams

back down

Lid stays open and

will not close

Lid opens and

closes constantly

Lights are on but

there is no power

Reason / Solution

Check the batteries are inserted correctly and are in the correct position.

Turn the bin OFF and ON again using the button at the back of the bin.

Clean the sensor area with a dry, clean cloth.

Reset the sensor by turning off the bin and taking the batteries out for 24 hours.

Check nothing is blocking the lid before trying to close.

Clean the sensor area with a dry, clean cloth.

Reset the sensor by turning off the bin and taking the batteries out for 24 hours.

Check the batteries are inserted correctly and haven't fallen out of place.

Replace the batteries.

The lid has been forced open and/or closed, a new lid is required.

Rubbish or object is too close to the lid and is triggering the sensor.

Kitchen counter or shelf is directly above the sensor.

A person walked by and was too close to the sensor.

Intense fluorescent lights are directly above the sensor.

The motor is broken, a new lid is required.