DIHS Optima W R2 Plus Manuel de démarrage rapide - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} DIHS Optima W R2 Plus. DIHS Optima W R2 Plus 7 pages.

Step 3: Clip the front of the thermostat onto the back plate.

TC-25 TC-30:

Step 1: Using a small screwdriver, slightly loosen receiver cover plate.

Step 2: Terminate the thermostat as shown in the diagram

Step 3: Clip the front of the thermostat onto the back plate.

Types of receivers (with RF and WiFi);

TC-25: Wall mounted receiver, 230Vac, voltfree output, 10 A Ohmic load / 4A Cap/ind load.

TC-30: Wall mounted receiver with floorsensor, 230Vac, voltfree output, 10 A Ohmic load / 4A Cap/ind

Load.

TC-35: Flush mounted receiver, 230Vac, voltfree output, 16 A Ohmic load / 10A Cap/ind load.

TC-40: Flush mounted receiver with floorsensor, 230Vac, voltfree output, 16 A Ohmic load / 10A

Cap/ind Load.

TC-60: Plugin mounted receiver, 230Vac, powered output, 16 A Ohmic load / 10A Cap/ind load.

NOTE;

When the voltage output is above 230Vac, eg 240-250Vac, then the capacity of the receiver should be

lower. For the TC-25 and TC-30 the maximum ohmic load is then 6A. For the TC-35, TC-40 and TC-60

its 12A ohmic load.

OPTIMA W R2 PLUS THERMOSTAT

Optima W PLUS is a development of DIHS BV, NETHERLANDS. www.dihsbv.nl