Epson Stylus COLOR 1160 Informations sur le produit - Page 11

Parcourez en ligne ou téléchargez le pdf Informations sur le produit pour {nom_de_la_catégorie} Epson Stylus COLOR 1160. Epson Stylus COLOR 1160 12 pages. Product support bulletin(s)
Également pour Epson Stylus COLOR 1160 : Fiche d'information sur le produit (4 pages), Brochure & Specs (24 pages), Commencer ici (2 pages), Remplacement des cartouches (2 pages), Fiche d'information sur le produit (4 pages), Bulletin d'information sur les produits (6 pages), Spécifications (2 pages), Bulletin d'information sur les produits (2 pages), Bulletin d'information sur les produits (4 pages), Bulletin d'information sur les produits (7 pages)

Imprimer la page

Epson Stylus COLOR 1160 Informations sur le produit

Or, with Windows, click

select

. Right-click the

Printers

icon in the Printers windows. Select

1160

(

in Windows NT).

Document Defaults

3. Windows: Click the

Utility

Macintosh: Click the

4. You see the Utility menu. Click the

button.

5. Follow the instructions on the screen to print a test page.

6. Select the most precise alignment pattern from the choices

on the test page. Enter the number of the best aligned

pattern following the instructions on the screen.

Cleaning the Printer

To keep your printer working at its best, you should clean it

several times a year. Follow these steps:

1. Turn off the printer, unplug the power cord, and

disconnect the printer cable.

2. Remove all the paper from the sheet feeder.

3. Clean the exterior of the printer with a soft, damp cloth.

4. Clean ink out of the printer's interior with a soft, damp

cloth.

Don't touch the gears inside the printer.

Never use alcohol or thinner for cleaning; they can

damage the printer components and case.

Don't use a hard or abrasive brush.

Don't get water on the printer components and don't

spray lubricants or oils inside the printer.

Don't use any cleaning sheets included with special

media; they may jam inside the printer.

Transporting the Printer

If you move your printer some distance, you need to prepare it

for transportation in its original box.

To avoid damage, always leave the ink cartridges

installed when transporting the printer.

Be sure to remove the tape used in step 4 after installing

the printer in its new location.

, point to

, then

Start

Settings

EPSON Stylus COLOR

Properties

tab.

Utility button.

Print Head Alignment

Follow these steps:

1. Turn on the printer, wait until the print head locks in the

far right position, then turn off the printer.

2. Unplug the power cord from the electrical outlet. Then

disconnect the printer cable from the printer.

3. Remove any paper from the printer and remove the paper

support.

4. Open the printer cover. Secure the ink cartridge holder to

the printer with tape as shown, then close the printer cover.

5. Push in the output tray extensions and close the tray.

6. Repack the printer and attachments in the original box

using the protective materials that came with it. See the

unpacking sheet that was packed with your printer.

Be sure to keep the printer level as you transport it.

After transporting the printer, remove the tape securing the

print head and test your printer. If you notice a decline in

print quality, clean the print head (see page 9); if output is

misaligned, align the print head (see page 10).

Epson Stylus COLOR 1160 Informations sur le produit - Page 11

Cleaning the Printer

Transporting the Printer

Related Documentation