Or, with Windows, click
select
. Right-click the
Printers
icon in the Printers windows. Select
1160
(
in Windows NT).
Document Defaults
3. Windows: Click the
Utility
Macintosh: Click the
4. You see the Utility menu. Click the
button.
5. Follow the instructions on the screen to print a test page.
6. Select the most precise alignment pattern from the choices
on the test page. Enter the number of the best aligned
pattern following the instructions on the screen.
Cleaning the Printer
To keep your printer working at its best, you should clean it
several times a year. Follow these steps:
1. Turn off the printer, unplug the power cord, and
disconnect the printer cable.
2. Remove all the paper from the sheet feeder.
3. Clean the exterior of the printer with a soft, damp cloth.
4. Clean ink out of the printer's interior with a soft, damp
cloth.
Don't touch the gears inside the printer.
Never use alcohol or thinner for cleaning; they can
damage the printer components and case.
Don't use a hard or abrasive brush.
Don't get water on the printer components and don't
spray lubricants or oils inside the printer.
Don't use any cleaning sheets included with special
media; they may jam inside the printer.
Transporting the Printer
If you move your printer some distance, you need to prepare it
for transportation in its original box.
To avoid damage, always leave the ink cartridges
installed when transporting the printer.
Be sure to remove the tape used in step 4 after installing
the printer in its new location.
, point to
, then
Start
Settings
EPSON Stylus COLOR
Properties
tab.
Utility button.
Print Head Alignment
Follow these steps:
1. Turn on the printer, wait until the print head locks in the
far right position, then turn off the printer.
2. Unplug the power cord from the electrical outlet. Then
disconnect the printer cable from the printer.
3. Remove any paper from the printer and remove the paper
support.
4. Open the printer cover. Secure the ink cartridge holder to
the printer with tape as shown, then close the printer cover.
5. Push in the output tray extensions and close the tray.
6. Repack the printer and attachments in the original box
using the protective materials that came with it. See the
unpacking sheet that was packed with your printer.
Be sure to keep the printer level as you transport it.
After transporting the printer, remove the tape securing the
print head and test your printer. If you notice a decline in
print quality, clean the print head (see page 9); if output is
misaligned, align the print head (see page 10).
Related Documentation
TM-SC860/1160 EPSON Stylus COLOR 860/1160 Service
Manual
PL-SC1160
EPSON Stylus COLOR 1160 Parts Price
List
CPD 9237
EPSON Stylus COLOR 1160 Printer
Basics
CPD 9238
EPSON Stylus COLOR 1160 Start Here
CPD 9365
EPSON Stylus COLOR 1160 Unpacking
the Printer
9/99
EPSON Stylus COLOR 1160
Tape the ink cartridge holder
to the printer case
EPSON Stylus COLOR 1160
- 11
ページを印刷する