Epson Stylus Color 740 Manuel d'information sur les produits - Page 7

Imprimer la page

Epson Stylus Color 740 Manuel d'information sur les produits

Installing an Ink Cartridge for the First

Time

Follow these steps to install ink cartridges for the first time:

1. Plug the printer's power cord into a grounded outlet.

Caution:

Don't use an outlet that can be turned off by a wall

switch or timer, or one on the same circuit as a large

appliance. This may disrupt the power, which can erase

the printer's memory or damage its power supply.

2. Remove the ink cartridges from their packages. Then

remove only the yellow part of the tape seal on top as

shown. Don't pull off the blue portion or try to remove

the clear seal on the bottom of the cartridges.

Remove the yellow

tape

Black cartridge

Caution:

Use the ink cartridges packed with your printer the first

time you install them or your printer won't charge ink

properly. You must remove the yellow tape from the

cartridge or you will permanently damage it. Don't try to

remove the clear seal from the bottom of the cartridge;

ink will leak out.

3. Lower the printer's output tray and open the cover.

Color cartridge

4. Press the P power button to turn on the printer.The

P power light flashes and the B black and A color ink out

lights come on. The ink cartridge holders move into loading

position.

Caution:

Always use the power button to turn the printer on or

off. Never use an external switch, such as a power strip

switch.

5. Lift up the two ink cartridge clamps.

6. Place the cartridges into their holders with the labels facing

up and toward the back of the printer. Then press down the

clamps until they lock into place.

WARNING:

If ink gets on your hands, wash them thoroughly with

soap and water. If ink gets in your eyes, flush them

immediately with water.

7. Press the R cleaning button to begin charging the ink

delivery system and close the printer cover.

Charging takes about a minute. The P power light

flashes and the printer makes various sounds until it's

finished. Don't turn off the printer or interrupt the

charging process or it will start over, using more ink than

necessary. Charging is finished when the P power light

stops flashing and stays on.

Caution:

Never turn off the printer while the P power light is

flashing, unless the printer hasn't moved or made any

noise for more than 5 minutes.

7/98

EPSON Stylus COLOR 740

- 7