Motorola 4500 Manuel - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Motorola 4500. Motorola 4500 41 pages.

Imprimer la page

Memory

If your party gives you another number to call,

simply enter this from the keypad. If you make an

error, press C to erase the last digit entered or

hold C to erase the entire entry.

Advise your party that they will hear tones as you

store the number. To call the scratch pad number at

the end of an ongoing conversation, press E, S.

NOTE Refer to "Silent Scratch Pad" on page 45

for details on silencing the tones.

Tone Dialing (Two-Part Calling)

Your telephone provides the standard Dual Tone

Multi-Frequency (DTMF) signals typically used to

access alternate long distance services, signal

pagers, answering machines, etc. Generally, these

services use a two-part procedure: First, a call is

placed from the memory or through the keypad to a

central telephone number.Then a secondary dial

tone is heard, and the additional tone digits are sent.

To tone dial from the keypad

Enter the desired number and press S.

Append additional digits using the keypad once

prompted. The tones are automatically sent as

you press the keys. Do not press S again.

EXCEPTION If you have selected silent scratch

pad, you must press R , s after entering the

additional digits.

To tone dial from a memory location, recall from

memory the number you wish to send using R ,

location number. Then press S. To send

additional groups of numbers recall the location

number and press R , S. Repeat as needed.

Two-part calling can be automated by a unique

feature which permits the programming and

pauses between groups of numbers. When

recalled or sent, the telephone stops transmitting

at the pause and waits for your response (i.e.,

secondary dial tone).

Pause Dialing (Memory Linking)

1. Enter the ﬁrst group of numbers from the

keypad or recall them from memory using

R .

2. Insert a pause by pressing F, S.

insert paus ø will appear.

Press s and a ø will display where the

pause in inserted.

3. Enter the next group of numbers, or recall

them from memory by pressing F, R ,

two-digit location number.

4. Repeat this sequence for as many groups

as you wish up to a maximum of 32 digits.

(Each pause occupies a digit.)

EXAMPLE To construct a number sequence

which you might use to inquire about your bank

balance, follow this example. The entry sequence

required by the bank is to call the access number,

wait for the tone, enter your ID number followed

by #, wait for the tone, then enter your account

number followed by #.

The bank's telephone number is 123-4567. Your

ID number is 888. Your account number is 22.

Memory