Motorola CLS Series Manuel de l'utilisateur - Page 28
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola CLS Series. Motorola CLS Series 32 pages.
Également pour Motorola CLS Series : Manuel de référence rapide (2 pages)
Imprimer la page
Cloning Radio Settings
You can copy non-repeater
a second radio using the a Multi-Unit Charger (MUC).
You can clone only one radio at a time. The MUC does not have to be plugged in for
cloning, but both radios require charged batteries.
1. On the source radio, press and hold Push to Talk and
turning the radio on. The radio beeps and displays
2. Place the source radio in one of the charging pockets.
3. Turn the target radio on and place it in the charging pocket
that is paired with the pocket containing the source radio.
There are 3 paired charging pockets as indicated by the
3 pairs of charging status LEDs.
4. Press and hold
transmits its pre-programmed non-repeater customer specific
profile to the second radio. If cloning was successful, P or
Pass or "F" for Fail displays on the source radio and the target
radio displays all feature icons. If cloning was not successful,
F or Fail displays on the source radio.
5. Turn the target radio off and back on again to use.
6. To clone another radio, repeat steps 3 and 4.
7. To exit programming mode on the source radio, press and hold Push to Talk until
no longer appears.
24
Series radio profiles from one radio (the source) to
on the source radio. The source radio
for 7 seconds while
.
Paired
pockets
L
LEDs