Motorola CLS Series Kullanıcı Kılavuzu - Sayfa 28

İki Yönlü Telsiz Motorola CLS Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Motorola CLS Series 32 sayfaları.
Ayrıca Motorola CLS Series için: Hızlı Referans Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Cloning Radio Settings

You can copy non-repeater

a second radio using the a Multi-Unit Charger (MUC).

You can clone only one radio at a time. The MUC does not have to be plugged in for

cloning, but both radios require charged batteries.

1. On the source radio, press and hold Push to Talk and

turning the radio on. The radio beeps and displays

2. Place the source radio in one of the charging pockets.

3. Turn the target radio on and place it in the charging pocket

that is paired with the pocket containing the source radio.

There are 3 paired charging pockets as indicated by the

3 pairs of charging status LEDs.

4. Press and hold

transmits its pre-programmed non-repeater customer specific

profile to the second radio. If cloning was successful, P or

Pass or "F" for Fail displays on the source radio and the target

radio displays all feature icons. If cloning was not successful,

F or Fail displays on the source radio.

5. Turn the target radio off and back on again to use.

6. To clone another radio, repeat steps 3 and 4.

7. To exit programming mode on the source radio, press and hold Push to Talk until

no longer appears.

Series radio profiles from one radio (the source) to

on the source radio. The source radio

for 7 seconds while

Paired

pockets

LEDs