Motorola GP240 Manuel de l'utilisateur - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola GP240. Motorola GP240 46 pages. Professional radio, power distribution and controller
Également pour Motorola GP240 : Manuel de l'utilisateur (46 pages), Informations sur les services (32 pages), Informations sur les services (30 pages), Informations sur les services (30 pages)

UG_240_280_EN.fm Page 19 Wednesday, August 14, 2002 10:30 AM

RECEIVING A CALL

Turn the radio on and select the desired

zone and mode (see Selecting a Zone and

Mode).

Your radio is now set to receive calls on the

selected mode.

Turn the radio on and select the desired

conventional zone and mode (see Selecting

a Zone and Mode).

Press and hold the PTT switch on the side of

the radio and speak slowly and clearly into

the microphone area. The red LED lights

continuously when the radio is transmitting.

When you have finished talking, release the

PTT to listen.

Note: Do not interrupt another user. If the present

mode is programmed to receive PL, ensure that

Downloaded from

www.Manualslib.com

manuals search engine

• If the mode-busy feature is enabled, a

blinking red LED on receive (PTT released)

indicates that the mode is currently busy.

• If a mode is programmed for receive only,

any attempt to transmit on that mode will cause

an invalid-mode tone to sound until the PTT

switch is released.

Turn the radio on and select the desired

trunked zone and mode (see Selecting a

Zone and Mode).

Press and hold the PTT switch on the side of

the radio and speak slowly and clearly into

the microphone area. The red LED lights

when the radio is transmitting. When you

have finished talking, release the PTT to

listen.

Note: If you hear a busy signal (a low-frequency

"bah-bah-bah-bah"), release the PTT switch and

wait for a call-back tone (sounds like "di-di-dit").

When you hear the call-back tone you will have

three seconds to press the PTT switch. This