Motorola E398 series Manuel d'entretien - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Motorola E398 series. Motorola E398 series 44 pages. Tri-band wireless telephone
Également pour Motorola E398 series : Manuel de l'utilisateur (31 pages), Fiche technique (3 pages), Manuel de l'utilisateur (29 pages), Manuel de dépannage et de débogage (12 pages)

Imprimer la page
Motorola E398 series Manuel d'entretien
Disassembly
Removing and Replacing the Camera From MFT Chamber Assembly
30
1.
Remove the battery cover, battery, rear housing, and transceiver PC board as
described in the procedures.
2.
Disengage the two plastic MFT Chamber assembly side connectors from the
transceiver PC board and lift up the MFT Chamber assembly.
3.
Using the disassembly tool, gently pry up the camera flex connector from the
transceiver PC board.
4.
Using plastic tweezers, gently pry the connection between the camera flex and
the MFT Chamber assembly separating the adhesive.
Disassembly Tool
MFT Chamber
Figure 16. Removing and Replacing the Camera From the MFT Chamber
Assembly
5.
To replace, press the MFT Chamber side of the camera flex connector onto the
MFT Chamber assembly.
6.
Place the camera flex connector on the transceiver PC board camera connector
and press it into place.
7.
Fold over the MFT Chamber assembly, aligning the camera with the camera
hole in the MFT Chamber and press into place engaging the two plastic side
connectors on to the transceiver PC board.
8.
Replace the transceiver PC board, rear housing, battery, and battery cover as
described in the procedures.
Disassembly Tool
Plastic Tweezers
April 21, 2004
E398/E399 GSM
sassembly Too
Camera Flex
ssembly T
Camera
6809480A37-O