Motorola E398 series Instrukcja serwisowa - Strona 30

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Telefon bezprzewodowy Motorola E398 series. Motorola E398 series 44 stron. Tri-band wireless telephone
Również dla Motorola E398 series: Podręcznik użytkownika (31 strony), Arkusz danych (3 strony), Podręcznik użytkownika (29 strony), Podręcznik rozwiązywania problemów i debugowania (12 strony)

Disassembly

Removing and Replacing the Camera From MFT Chamber Assembly

Remove the battery cover, battery, rear housing, and transceiver PC board as

described in the procedures.

Disengage the two plastic MFT Chamber assembly side connectors from the

transceiver PC board and lift up the MFT Chamber assembly.

Using the disassembly tool, gently pry up the camera flex connector from the

transceiver PC board.

Using plastic tweezers, gently pry the connection between the camera flex and

the MFT Chamber assembly separating the adhesive.

Disassembly Tool

MFT Chamber

Figure 16. Removing and Replacing the Camera From the MFT Chamber

Assembly

To replace, press the MFT Chamber side of the camera flex connector onto the

MFT Chamber assembly.

Place the camera flex connector on the transceiver PC board camera connector

and press it into place.

Fold over the MFT Chamber assembly, aligning the camera with the camera

hole in the MFT Chamber and press into place engaging the two plastic side

connectors on to the transceiver PC board.

Replace the transceiver PC board, rear housing, battery, and battery cover as

described in the procedures.

Disassembly Tool

Plastic Tweezers

April 21, 2004

E398/E399 GSM

sassembly Too

Camera Flex

ssembly T

Camera

6809480A37-O