Motorola CP 140 Manuel d'utilisation de base - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation de base pour {nom_de_la_catégorie} Motorola CP 140. Motorola CP 140 16 pages. Uhf2 (438-470mhz)
Également pour Motorola CP 140 : Manuel de l'utilisateur (26 pages), Manuel d'utilisation de base (16 pages), Manuel d'utilisation de base (18 pages), Manuel de service détaillé (28 pages), Manuel d'installation Cps/Tuner (6 pages), Informations sur les services (46 pages), Informations sur les services (46 pages)

TURNING THE RADIO ON/OFF

Rotate the On/Off/

Volume Control knob

clockwise until you

hear a click.

OFF

Rotate the On/Off/

Volume Control knob

counterclockwise until

you hear a click. The

display clears and the

LED indicators turn off .

Turn the On/Off/Volume Control knob clockwise to

increase the volume, or counterclockwise to

decrease the volume.

–

use the pre-programmed Volume Set button:

Hold down the Volume Set

hear a continuous tone.

Turn the On/Off/Volume Control knob to the

desired volume level.

Release the Volume Set button.

At power up the radio may display a message

customised by your dealer, e.g.:

RADIO ON

After this text has been displayed, the radio

performs a self test routine. During the routine the

Green LED lights. On completion of a successful

self test the radio produces the Self-Test pass Tone,

the Green LED indicator goes out and the display

shows the channel that was in use at power down,

typically:

CHAN

This may be a number or an alias and will be the

current channel.

button

. You will

English