- ページ 13

ポータブルラジオ Motorola CP 140のPDF 基本マニュアルをオンラインで閲覧またはダウンロードできます。Motorola CP 140 16 ページ。 Uhf2 (438-470mhz)
Motorola CP 140 にも：ユーザーマニュアル (26 ページ), 基本マニュアル (16 ページ), 基本マニュアル (18 ページ), 詳細サービスマニュアル (28 ページ), Cps/チューナー・インストレーション・マニュアル (6 ページ), サービス情報 (46 ページ), サービス情報 (46 ページ)

TURNING THE RADIO ON/OFF

Rotate the On/Off/

Volume Control knob

clockwise until you

hear a click.

OFF

Rotate the On/Off/

Volume Control knob

counterclockwise until

you hear a click. The

display clears and the

LED indicators turn off .

Turn the On/Off/Volume Control knob clockwise to

increase the volume, or counterclockwise to

decrease the volume.

–

use the pre-programmed Volume Set button:

Hold down the Volume Set

hear a continuous tone.

Turn the On/Off/Volume Control knob to the

desired volume level.

Release the Volume Set button.

At power up the radio may display a message

customised by your dealer, e.g.:

RADIO ON

After this text has been displayed, the radio

performs a self test routine. During the routine the

Green LED lights. On completion of a successful

self test the radio produces the Self-Test pass Tone,

the Green LED indicator goes out and the display

shows the channel that was in use at power down,

typically:

CHAN

This may be a number or an alias and will be the

current channel.

button

. You will

English