Epson FX-1180 - Impact Printer Manuel rapide - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Epson FX-1180 - Impact Printer. Epson FX-1180 - Impact Printer 33 pages. Epson serial impact dot matrix printers
Également pour Epson FX-1180 - Impact Printer : Manuel de configuration (33 pages), Brochure & Specs (24 pages), Informations sur le produit (17 pages), Manuel de référence rapide (16 pages), Manuel (11 pages), Spécifications (2 pages), Manuel (18 pages), Spécifications (2 pages), Garantie limitée (1 pages), Manuel de référence (34 pages)

Imprimer la page

Epson FX-1180 - Impact Printer Manuel rapide

Paper-Type Switching

You can easily switch back and forth

between printing on continuous paper with

a push tractor and printing on single sheets

without having to remove or reload the

continuous paper.

Switching to printing on single

sheets

Follow the steps below to switch from

printing on continuous paper from a push

tractor to printing on single sheets.

Note:

❏ If continuous labels are loaded in the printer,

remove them before switching to single-sheet

printing. See "Special Papers" for more

information.

❏ If the tractor is in the pull position, remove

any continuous paper from it before

switching to single-sheet printing. See

"Continuous Paper with the Pull Tractor"

for more information.

1. If any printed pages remain in the

printer, press the Tear Off/Bin button to

advance the paper to the tear-off

position. Then tear off the printed pages.

2. Press the Load/Eject button to feed the

continuous paper backward to the

standby position. The paper is still

attached to the push tractor but is no

longer in the paper path.

Downloaded from:

http://www.usersmanualguide.com/

Caution:

Make sure you tear off your printed

document before you press the

Load/Eject button in the next step.

Reverse feeding several pages at a

time may cause a paper jam.

EPSON FX-880+/FX-1180+ Quick Guide

3. Lower the continuous paper support on

the paper guide until it clicks into place,

then move the paper guide to the upright

position.

4. Set the paper release lever to the

single-sheet position.

5. Load single sheets as described in

"Loading Single Sheets" in the Reference

Guide.

Paper-Type Switching (1/2)