Epson FX-1180 - Impact Printer 빠른 매뉴얼 - 페이지 25

{카테고리_이름} Epson FX-1180 - Impact Printer에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson FX-1180 - Impact Printer 33 페이지. Epson serial impact dot matrix printers
Epson FX-1180 - Impact Printer에 대해서도 마찬가지입니다: 설정 매뉴얼 (33 페이지), 브로셔 및 사양 (24 페이지), 제품 정보 (17 페이지), 빠른 참조 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 사양 (2 페이지), 매뉴얼 (18 페이지), 사양 (2 페이지), 제한 보증 (1 페이지), 참조 매뉴얼 (34 페이지)

페이지 인쇄

Paper-Type Switching

You can easily switch back and forth

between printing on continuous paper with

a push tractor and printing on single sheets

without having to remove or reload the

continuous paper.

Switching to printing on single

sheets

Follow the steps below to switch from

printing on continuous paper from a push

tractor to printing on single sheets.

Note:

❏ If continuous labels are loaded in the printer,

remove them before switching to single-sheet

printing. See "Special Papers" for more

information.

❏ If the tractor is in the pull position, remove

any continuous paper from it before

switching to single-sheet printing. See

"Continuous Paper with the Pull Tractor"

for more information.

1. If any printed pages remain in the

printer, press the Tear Off/Bin button to

advance the paper to the tear-off

position. Then tear off the printed pages.

2. Press the Load/Eject button to feed the

continuous paper backward to the

standby position. The paper is still

attached to the push tractor but is no

longer in the paper path.

Downloaded from:

http://www.usersmanualguide.com/

Caution:

Make sure you tear off your printed

document before you press the

Load/Eject button in the next step.

Reverse feeding several pages at a

time may cause a paper jam.

EPSON FX-880+/FX-1180+ Quick Guide

3. Lower the continuous paper support on

the paper guide until it clicks into place,

then move the paper guide to the upright

position.

4. Set the paper release lever to the

single-sheet position.

5. Load single sheets as described in

"Loading Single Sheets" in the Reference

Guide.

Paper-Type Switching (1/2)