Epson PowerLite 61p Mise à jour sur le remplacement des lampes - Page 2

Parcourez en ligne ou téléchargez le pdf Mise à jour sur le remplacement des lampes pour {nom_de_la_catégorie} Epson PowerLite 61p. Epson PowerLite 61p 2 pages. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Également pour Epson PowerLite 61p : Manuel de l'utilisateur (42 pages), Spécifications (2 pages), Manuel d'utilisation (47 pages), Manuel d'installation rapide (2 pages), Liste des pièces (1 pages), Informations sur le produit (15 pages), Manuel d'installation (19 pages), Bulletin d'information sur les produits (25 pages), Bulletin d'information sur les produits (8 pages), Bulletin d'information sur les produits (22 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (41 pages), Bulletin d'information sur les produits (15 pages), Bulletin d'information sur les produits (22 pages)

8. Hold the lamp as shown and pull it straight out.

Note: This product includes a lamp component that

contains mercury (Hg). Please consult your state and

local regulations regarding disposal or recycling. Do not

put it in the trash.

9. Gently insert the new lamp. If it doesn't fit easily,

make sure it's facing the correct way.

Caution: Do not touch the glass portion of the lamp

assembly. Touching the glass could result in premature

lamp failure.

10. Once the lamp is fully inserted, tighten its screws.

Note: Be sure to seat the lamp fully and secure the

lamp cover. If the lamp is not properly installed or the

cover is loose, the lamp will not turn on.

11. Lower the lamp cover into place. (The top of the

cover should be flush with the surface of the

projector.) Then slide the cover closed and tighten

the screw.

12. Reset the lamp timer as described in the User's Guide.

Epson is a registered trademark of Seiko Epson Corporation.

PowerLite is a registered trademark of Epson America, Inc.

CPD-18664