Epson PowerLite 61p Lamp Replacement Update - Page 2

Browse online or download pdf Lamp Replacement Update for Software Epson PowerLite 61p. Epson PowerLite 61p 2 pages. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Also for Epson PowerLite 61p: User Manual (42 pages), Specifications (2 pages), Operation Manual (47 pages), Quick Setup Manual (2 pages), Parts List (1 pages), Product Information (15 pages), Installation Manual (19 pages), Product Support Bulletin (25 pages), Product Support Bulletin (8 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages)

Print Page

8. Hold the lamp as shown and pull it straight out.

Note: This product includes a lamp component that

contains mercury (Hg). Please consult your state and

local regulations regarding disposal or recycling. Do not

put it in the trash.

9. Gently insert the new lamp. If it doesn't fit easily,

make sure it's facing the correct way.

Caution: Do not touch the glass portion of the lamp

assembly. Touching the glass could result in premature

lamp failure.

10. Once the lamp is fully inserted, tighten its screws.

Note: Be sure to seat the lamp fully and secure the

lamp cover. If the lamp is not properly installed or the

cover is loose, the lamp will not turn on.

11. Lower the lamp cover into place. (The top of the

cover should be flush with the surface of the

projector.) Then slide the cover closed and tighten

the screw.

12. Reset the lamp timer as described in the User's Guide.

Epson is a registered trademark of Seiko Epson Corporation.

PowerLite is a registered trademark of Epson America, Inc.

CPD-18664