Epson PowerLite 735c Manuel de l'utilisateur - Page 5

Configuring Your Network Connection

Follow the instructions in your Projector User's Guide to start EasyMP

and insert the EPSON 802.11b card in the projector.

Determine whether you will use Ad Hoc mode or Access Point mode

to connect to the projector. Follow the instructions in your Projector

User's Guide to configure the projector for the mode you will be using.

Then follow the instructions beginning on page 5 to set up your

Macintosh in either Ad Hoc mode or Access Point mode.

Before you can connect to the projector, you need to make sure the

network settings on your Macintosh match the settings on the

projector.

1. From the Apple pull-down menu, select

Then double-click the

Settings window:

Check the port you want to use

2. Under

Port Configurations

network or

Built-in Ethernet

3. Click

Apply Now

System Preferences

icon. You see the Network

Network

, select

AirPort

for a wired network.

. Then close the window.

for a wireless

note

EMP NS Connection does

not support Macintosh

Channel Ad Hoc mode.

note

Make sure that only one port

is selected.