Epson PowerLite 735c Manuel de l'utilisateur - Page 6

note

If you see a message during

installation that the

EPSON GDI Monitor

Driver has not passed

Windows Logo testing, click

Continue Anyway

For optimal performance, set your screen resolution to

1024 × 768 or lower with a color depth of Thousands

(16 bit).

When making Location settings, you can select the desired

location and change all the network settings one at a time.

4. Make sure the following is displayed in the communication status

bar in the top right corner of the screen:

If the projector has been assigned an

communication status icon and select the projector's ESSID

name from the menu.

If you are using the wired LAN Connection mode, click

AirPort Off

Using EMP NS Connect for Wireless

Projecting

Your projector now includes version 1.20 of EMP NS Connection for

Windows (equivalent to version 1.0 for Macintosh). If you are using a

Macintosh, the screens will look different from those shown in this

section, but the same features are available.

Follow the instructions in your Projector User's Guide to install the

software, start EasyMP, and set up your projector and computer in

either Ad Hoc mode (computer to computer) or Access Point mode.

Then follow these steps:

1. Make sure you've installed your wireless 802.11b card. Then do

one of the following:

Windows: select

Macintosh: double-click the

your Applications folder.

ESSID

EMP NS Connection

name, click the

Turn

from the Start menu.

icon in