Epson PowerLite 735c Informations sur le produit - Page 3

Parcourez en ligne ou téléchargez le pdf Informations sur le produit pour {nom_de_la_catégorie} Epson PowerLite 735c. Epson PowerLite 735c 14 pages. Release of check tool for network projectors v1.00 for windows
Également pour Epson PowerLite 735c : Manuel de l'utilisateur (42 pages), Manuel d'utilisation (36 pages), Manuel de l'utilisateur (29 pages), Spécifications (2 pages), Manuel d'utilisation (47 pages), Liste des pièces (1 pages), Bulletin d'information sur les produits (30 pages), Manuel d'installation (19 pages), Manuel d'installation rapide (2 pages), Bulletin d'information sur les produits (25 pages), Bulletin d'information sur les produits (38 pages), Bulletin d'information sur les produits (12 pages), Bulletin d'information sur les produits (42 pages), Bulletin d'information sur les produits (22 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (41 pages), Bulletin d'information sur les produits (34 pages), Bulletin d'information sur les produits (38 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (15 pages), Bulletin d'information sur les produits (22 pages)

Imprimer la page
Epson PowerLite 735c Informations sur le produit
Use the figure below as a guideline to help you determine how
far from the screen to place the projector. Image size generally
increases with distance, but may vary depending on how you
position the zoom ring and whether you have adjusted the
image size with other settings.
33 to 38.5 ft
6.5 to 7.5 ft
If you place the projector below the level of the screen, you'll
have to tilt it up by extending the feet as shown on page 5.
This causes the projector to lose its square shape, but the
projector automatically compensates. You can manually
correct the distortion by pressing the
described on page 5.
If you place the projector level with the bottom of the screen,
the image will be square and you won't have to adjust it. If
you place the projector higher than the bottom of the screen,
the image will still be square, but you won't be able to fill the
whole screen with the image.

Starting Up the Projector

Make sure your projector and other equipment are set up and
connected correctly. Then turn on your projector, as described
below, followed by any equipment you've connected to it. You
can turn on your computer and video equipment in any order,
but if you have both a computer and video source connected,
you may have to switch to the desired source as described on
page 4.
3 to 4 ft
Distance
from screen
button as
Keystone
Ideal
height
EPSON PowerLite 735c Projector

Turning On the Projector

Follow these steps to plug in and turn on the projector:
1. Remove the lens cap.
Caution: Do not use the projector with the lens cap in place.
The heat generated by the lens can damage the cap.
2. Connect one end of the power cord to the projector's
power inlet.
3. Connect the other end to an electrical outlet.
The P power light on top of the projector turns orange,
indicating that the projector is receiving power but not yet
turned on.
4. Press the red P
Power
can also use the P
Power
button
The P power light flashes green as the projector warms up,
and the projection lamp comes on in about 40 seconds.
Then the power light stays green.
Warning: Never look into the lens when the lamp is on. This
can damage your eyes.
5. Select the source as follows:
❏ On the control panel, the
between equipment connected to the Video, S-Video,
and Computer/Component Video ports, or to
EasyMP
(for wireless network and memory card
™
presentations).
❏ On the remote control, the
switches between a computer source and EasyMP. The
S-Video/Video
source and standard composite video source.
2/03
button on top of the projector. You
button on the remote control.
Power
button switches
Source
Comp/EasyMP
button switches between an S-Video
EPSON PowerLite 735c Projector
button
3
-