Epson Stylus Pro 4800 Portrait Edition Manuel de configuration - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Epson Stylus Pro 4800 Portrait Edition. Epson Stylus Pro 4800 Portrait Edition 15 pages. Stylus pro 800 series
Également pour Epson Stylus Pro 4800 Portrait Edition : Brochure & Specs (8 pages), Manuel de démarrage (10 pages), Manuel (17 pages), Important Information (2 pages), Manuel de référence rapide (12 pages), Garantie limitée (12 pages), Brochure & Specs (6 pages), Manuel d'installation (4 pages), Brochure & Specs (16 pages)

7. Hold both the fixed and movable flanges, and

rewind the paper to the line marked with an

arrow mark.

8. Move the paper lever to the secured position.

The printer automatically feeds the paper to

the printing position.

9. Close the roll paper cover.

10. Raise the roll paper support.

11. Extend the paper tray and the paper tray cover

according to the paper length to be used for

printing.

12. Press the Paper Source

Auto Cut On

on the LCD.

Caution:

Do not leave the paper in the printer for a long

period of time; its quality will deteriorate. We

recommend that you remove the paper from the

printer after printing.

Loading Cut-Sheet Paper

To load cut-sheet paper in the paper tray, follow

the steps below.

Note:

This section describes loading cut-sheet paper smaller

than A3 size. If you want to load A3 or a larger paper,

or if you want to know the details of paper handling, see

"Paper Handling" in the Reference Guide included on

the Printer Software CD-ROM shipped with your

printer.

1. Make sure the printer is on and in the READY

state.

2. Press the Paper Source

Sheet

on the LCD.

button to select Roll

button to select