Epson Stylus Pro 4800 Portrait Edition 설정 매뉴얼 - 페이지 9

{카테고리_이름} Epson Stylus Pro 4800 Portrait Edition에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Pro 4800 Portrait Edition 15 페이지. Stylus pro 800 series
Epson Stylus Pro 4800 Portrait Edition에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 시작하기 매뉴얼 (10 페이지), 매뉴얼 (17 페이지), 중요 정보 (2 페이지), 빠른 참조 매뉴얼 (12 페이지), 제한 보증 (12 페이지), 브로셔 및 사양 (6 페이지), 설치 매뉴얼 (4 페이지), 브로셔 및 사양 (16 페이지)

7. Hold both the fixed and movable flanges, and

rewind the paper to the line marked with an

arrow mark.

8. Move the paper lever to the secured position.

The printer automatically feeds the paper to

the printing position.

9. Close the roll paper cover.

10. Raise the roll paper support.

11. Extend the paper tray and the paper tray cover

according to the paper length to be used for

printing.

12. Press the Paper Source

Auto Cut On

on the LCD.

Caution:

Do not leave the paper in the printer for a long

period of time; its quality will deteriorate. We

recommend that you remove the paper from the

printer after printing.

Loading Cut-Sheet Paper

To load cut-sheet paper in the paper tray, follow

the steps below.

Note:

This section describes loading cut-sheet paper smaller

than A3 size. If you want to load A3 or a larger paper,

or if you want to know the details of paper handling, see

"Paper Handling" in the Reference Guide included on

the Printer Software CD-ROM shipped with your

printer.

1. Make sure the printer is on and in the READY

state.

2. Press the Paper Source

Sheet

on the LCD.

button to select Roll

button to select