Epson Stylus Pro 4800 Portrait Edition 설정 매뉴얼 - 페이지 12

{카테고리_이름} Epson Stylus Pro 4800 Portrait Edition에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Pro 4800 Portrait Edition 15 페이지. Stylus pro 800 series
Epson Stylus Pro 4800 Portrait Edition에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 시작하기 매뉴얼 (10 페이지), 매뉴얼 (17 페이지), 중요 정보 (2 페이지), 빠른 참조 매뉴얼 (12 페이지), 제한 보증 (12 페이지), 브로셔 및 사양 (6 페이지), 설치 매뉴얼 (4 페이지), 브로셔 및 사양 (16 페이지)

페이지 인쇄
Epson Stylus Pro 4800 Portrait Edition 설정 매뉴얼
4. Adjust the length of the paper tray and the
paper tray cover according to the paper size.
If you do not extend them, the printout may
fall.
Note:
Make sure the roll paper support is not raised.
c
Caution:
Do not leave the paper in the printer for a long
period of time; its quality will deteriorate. We
recommend that you remove the paper from the
printer after printing.
Connecting the Printer with Your
Computer
The available interface varies depending on the
®
®
Microsoft
Windows
operating systems or
®
®
Apple
Macintosh
system version used, as
follows:
USB interface and Ethernet interface (Option):
Windows XP, Me, 98, and 2000
Mac OS X 10.2 or later
Mac OS 9.x
IEEE1394 interface:
Windows XP, Me, and 2000
Mac OS X 10.2 or later
Mac OS 9.x
12
Using the built-in USB interface
To connect the printer to a USB port, you need a
standard shielded USB cable. To connect the
printer to your computer using the built-in USB
interface, follow the steps below.
Note:
If you use an inappropriate cable or connect peripheral
devices between the printer and the computer, the
connection may become unstable.
1. Make sure both the printer and the computer
are turned off.
2. Connect the USB cable to the printer.
3. Plug the other end of the cable into the USB
interface connector of the computer.
After connecting the printer and the computer
with the USB cable, see "Installing the Printer
Software" on page 14.
Using the built-in IEEE1394 interface
To connect your printer and computer using the
installed IEEE 1394 interface card, follow the steps
below.
Note:
Be sure to use the IEEE 1394 Cable (C836302);
otherwise, the cable may exceed the limit of the EMC
Regulation of each country.
1. Make sure both the printer and the computer
are turned off.
USB interface connector