Epson Stylus Pro 4880 Portrait Edition Manuel de configuration - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Epson Stylus Pro 4880 Portrait Edition. Epson Stylus Pro 4880 Portrait Edition 16 pages. Warranty statement
Également pour Epson Stylus Pro 4880 Portrait Edition : Brochure (1 pages), Fiche technique (6 pages), Brochure & Specs (6 pages), Manuel de référence rapide (12 pages), Manuel du réseau (46 pages), Manuel d'installation (4 pages), Manuel d'information sur les produits (16 pages), Garantie limitée (12 pages)

Loading Roll Paper

Attaching the roll paper to the

spindle

When installing the roll paper onto the spindle,

follow the steps below.

1. Slide the movable flange off the end of the

spindle.

2. When attaching roll paper with a 3-inch core,

keep the gray attachments attached.

When attaching the roll paper with a 2-inch

core, remove the gray attachments from the

flange.

Note:

Keep the gray attachments in a safe place for future

use.

3. Place the roll paper on a flat surface so that it

does not unwind. Slide the roll paper onto the

spindle and onto the flange until it fixes into

place.

Note:

Do not stand the spindle when attaching the roll

paper. It may cause slant paper feeding.

4. Slide the movable flange (removed in step 1)

onto the spindle and into the end of the roll

paper until it fixes into place.

Attaching roll paper to the printer

To attach roll paper to the printer, follow the steps

below.

1. Open the roll paper cover.

2. Make sure that the movable flange is fixed into

the end of the roll paper properly.

3. Hold the roll paper spindle so that the black

movable flange is on the left side. Then place

the spindle in the groove located on the top of

the printer.

Black movable flange