Epson Stylus Pro 7600 Manuel de référence rapide - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} Epson Stylus Pro 7600. Epson Stylus Pro 7600 11 pages. W 24-inch-wide and 44-inch-wide photographic
printers with new seven-color ultrachrome ink system
Également pour Epson Stylus Pro 7600 : Manuel de déballage et d'installation (24 pages), Manuel (5 pages)
Imprimer la page
4
Open the front cover. (The cover has special tabs
that act as paper supports when the cover is
open.)
5
Feed the posterboard into the paper slot until it
meets resistance.
If you're using stock more than 39 inches
long, load it long edge first (in landscape
orientation).
6
Align the board with the scale on the roll paper
cover.
7
Return the paper lever to the locked position.
Then close the front cover.
8
Press the Pause button. The board feeds into
the printing position automatically and READY
appears on the control panel.
9
Run your print job. After it is finished, the
posterboard stays in the printer.
10
To remove the print, hold it and push the paper
lever back to the released position.
To avoid damaging the printer, never move
the paper lever during printing, or while the
Operate or Pause light is flashing.
3