Philips AZ1826 Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Philips AZ1826. Philips AZ1826 13 pages. Cd soundmachine
Également pour Philips AZ1826 : Fiche technique (2 pages), Manuel d'utilisation rapide (2 pages), Manuel d'utilisation rapide (1 pages), Manuel d'utilisation rapide (2 pages)
Imprimer la page
USB CONNECTION
Notes:
– Make sure that file names of MP3 files end with
.mp3. and the file names of WMA files end with
.wma.
– For DRM protected WMA files, use Windows
Media Player 10 (or later) for conversion. Visit
www.microsoft.com for details about Windows
Media Player and WM DRM (Windows Media
Digital Rights Management).
Playing a USB mass storage device
1 Make sure that your AZ1826 is being powered by
AC mains or specified batteries.
2 Adjust the Source selector to CD/USB.
• Press CD/USB once to select USB mode if "CD" is
displayed.
➜Display shows "USB", and the total track
number and album number. (see 8).
3 Plug a compatible USB mass storage device to
AZ1826's USB port marked
suitable USB cable to connect between the device
and AZ1826's USB port.
➜The device will automatically power on.
• If the device is not powered on, turn on the power
manually, then re-connnect it.
4 Press 2; on your AZ1826 to start play.
• To select album, press ALBUM/PRESET -, + (on
the remote control -, +).
Maintenance & Safety (See 9)
CD player and CD handling
• If the CD player cannot read CDs correctly, use a
cleaning CD to clean the lens before taking the set
to repair.
• The lens of the CD player should never be touched!
• Sudden changes in the surrounding temperature
can cause condensation on the lens of your CD
player. Playing a CD is then not possible. Do not
attempt to clean the lens but leave the set in a
warm environment until the moisture evaporates.
• Always close the CD door to avoid dust on the
lens.
• To clean the CD, wipe in a straight line from the
centre towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.
• Never write on a CD or attach any stickers to it.
MAINTENANCE & SAFETY
Safety Information
• Place the set on a hard, flat and stable surface so
that the system does not tilt.
• Do not expose the set, batteries, CDs to humidity,
rain, sand or excessive heat caused by heating
equipment or direct sunlight.
• Where the MAINS plug or an appliance coupler is
used as the disconnet device, the disconnet device
shall remain readily operable.
• The apparatus shall not be exposed to
dripping or splashing.
• Adequate ventilation with a minimum gap of 15 cm
between the ventilation holes and surrounding
surfaces is necessary to prevent heat build-up.
• The ventilation should not be impeded by covering
the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc..
• No objects filled with liquids, such as vases, shall
be placed on the apparatus.
• No naked flame sources, such as lighted candles,
. If needed, use a
should be placed on the apparatus.
• The mechanical parts of the set contain
self-lubricating bearings and must not be oiled or
lubricated.
• To clean the set, use a dry cloth. Do not use any
cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may harm
the housing.