MSI MSI-8000HD Manuel de l'opérateur - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} MSI MSI-8000HD. MSI MSI-8000HD 48 pages. Rf remote display

Imprimer la page

3.6 2-Units/ 5-Units

The

Fx-2.Unit

key will switch the force units between pounds and kilograms.

Selecting the

Fx-5.Unit

Short), Metric Tons, and kiloNewtons.

3.7 Hi-Res

Only available with the MSI-7300 Dyna-Link (refer to the Dyna-Link manual

Note

PN 152160)

Hi-Res Mode will make the MSI-8000HD more sensitive to motion and movement

resulting in a less stable display. When Hi-Res is on, the filter is automatically set to

the Hi-1 setting (if Hi-2 is already set, then the filter is not changed). This will have a

small effect on settling time. When Hi-Res is turned off, the filter setting resets to the

previous filter setting.

Pressing the

Fx-HiRes

The high resolution mode continues until the

is cycled. While in the Hi-Res mode the appropriate

at a slow rate.

Hi-Res mode does not increase the accuracy, but allows for smaller weight

Note

incrementation to be displayed.

Use Tare or the

3.8 Print

Pressing the

F3-Print

base of the Dyna-Link.

If an F-Key is programmed as Print and the Print Setup is configured as continuous,

then the

F3-Print

details on data output.

The Print function is always available on the

Note

necessary to program an

scale will cause the Comm Port on the Remote to output the selected data

string.

3.9 Scan

Pressing the

Fx-Scan

MSI-8000HD Operator's Manual

setting will scroll through all available units: lb, kg, Tons (US

key places the display into a temporary high resolution mode.

ZERO

key to zero out any initial error.

key outputs a configured text string to the RS-232 port on the

key is used for Start Print/Stop Print. See Section 5.6 for more

key displays RF connected channels in order.

Fx-HiRes

MSI-8000HD

to "Print". Then pushing F1 or F2 on the

key is pressed again, or power

LED will blink continuously

, so it is not