- ページ 18
モニター MSI MSI-8000HDのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。MSI MSI-8000HD 48 ページ。 Rf remote display
3.6 2-Units/ 5-Units
The
Fx-2.Unit
key will switch the force units between pounds and kilograms.
Selecting the
Fx-5.Unit
Short), Metric Tons, and kiloNewtons.
3.7 Hi-Res
Only available with the MSI-7300 Dyna-Link (refer to the Dyna-Link manual
Note
PN 152160)
Hi-Res Mode will make the MSI-8000HD more sensitive to motion and movement
resulting in a less stable display. When Hi-Res is on, the filter is automatically set to
the Hi-1 setting (if Hi-2 is already set, then the filter is not changed). This will have a
small effect on settling time. When Hi-Res is turned off, the filter setting resets to the
previous filter setting.
Pressing the
Fx-HiRes
The high resolution mode continues until the
is cycled. While in the Hi-Res mode the appropriate
at a slow rate.
Hi-Res mode does not increase the accuracy, but allows for smaller weight
Note
incrementation to be displayed.
Use Tare or the
3.8 Print
Pressing the
F3-Print
base of the Dyna-Link.
If an F-Key is programmed as Print and the Print Setup is configured as continuous,
then the
F3-Print
details on data output.
The Print function is always available on the
Note
necessary to program an
scale will cause the Comm Port on the Remote to output the selected data
string.
3.9 Scan
Pressing the
Fx-Scan
14
MSI-8000HD Operator's Manual
setting will scroll through all available units: lb, kg, Tons (US
key places the display into a temporary high resolution mode.
ZERO
key to zero out any initial error.
key outputs a configured text string to the RS-232 port on the
key is used for Start Print/Stop Print. See Section 5.6 for more
F1
key displays RF connected channels in order.
Fx-HiRes
Fx
MSI-8000HD
F2
or
to "Print". Then pushing F1 or F2 on the
key is pressed again, or power
LED will blink continuously
, so it is not