CRU ioSafe Solo Hawk Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CRU ioSafe Solo Hawk. CRU ioSafe Solo Hawk 16 pages. Waterproof portable storage device

Imprimer la page

ioSafe Solo Hawk User Manual

3 Usage with Windows and Mac Operating Systems

3.1 Usage with Windows Operating Systems

3.1.1 Formatting the Solo Hawk

Following the steps below for your specific Windows operating system to reformat your Solo

Hawk.

The Solo Hawk will work with Windows right out of the box without needing to format it. You may skip

this section if you are setting up the Solo Hawk to work with Windows.

Windows 10

a. Right-click on the Start Button and then select Disk Management.

b. The drive should appear in the list of Disks in the lower pane. You may need to scroll

down to see it. If the drive is already formatted, you can identify it easily by its volume

name. If the drive is not initialized or is brand new, a window will pop up asking you to

select a partition type. Select GPT and press OK.

c. To format the volume, right-click the Drive Properties Box of the drive (highlighted

red in Figure 7) and select New Simple Volume...

c. Unless you wish to customize the settings in these dialog prompts, click Next on the

Select Partition, Specify Volume/Partition Size, and Assign Drive Letter or Path dialog

prompts, leaving the default settings.

d. Choose your preferred file system from the file system selection window that appears

and enter a name for the new volume. Then check the box labeled Quick Format,

which ensures that the formatting process will take less than a minute.

Figure 7. The Disk Management pane with the Drive

Properties Box highlighted in red.