CRU ioSafe Solo Hawk Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CRU ioSafe Solo Hawk. CRU ioSafe Solo Hawk 16 pages. Waterproof portable storage device

Imprimer la page

e. Click Next and then Finish to start the format process. When the format is complete,

the Drive Properties Box will update to show the new volume name. The new volume

can now be found by opening a File Explorer window and clicking on This PC in the

navigation pane to the left.

Windows 8.1

a. Press WINKEY + X and then select Disk Management.

b. The drive should appear in the list of Disks in the lower pane. You may need to scroll

down to see it. If the drive is already formatted, you can identify it easily by its volume

name. If the drive is not initialized or is brand new, a window will pop up asking you to

select a partition type. Select GPT and press OK.

c. To format the volume, right-click the Drive Properties Box (highlighted in red in

Figure #7) and select New Simple Volume...

d. Unless you wish to customize the settings in these dialog prompts, click Next on the

Select Partition, Specify Volume/Partition Size, and Assign Drive Letter or Path dialog

prompts, leaving the default settings.

e. Choose your preferred file system from the file system selection window that appears

and enter a name for the new volume. Then check the box labeled Quick Format,

which ensures that the formatting process will take less than a minute.

Click Next and then Finish to start the format process. The new volume can now be

found by opening a File Explorer window.

Windows 7

a. Click on the Start Button, right-click the Computer button in the Start Menu, and

then select Manage. In the left pane of the Computer Management window that

opens, left-click on Disk Management (labeled 'A' in Figure 8).

b. The drive should appear in the list of Disks in the lower pane. You may need to scroll

down to see it. If the drive is already formatted, you can identify it easily by its volume

name. If the Device Properties Box (labeled 'B' in Figure 8) says "Not Initialized", you'll

need to initialize the disk before formatting it.

Right-click where it says "Not Initialized" and select Initialize Disk. If you are prompted

to select a partition type, select GPT.

c. To format the volume, right-click the Drive Properties Box (labeled 'C' in Figure 8) and

select New Simple Volume...

ioSafe Solo Hawk User Manual