Dimplex contempra ef KDS6401E Manuel de pièces et d'entretien - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel de pièces et d'entretien pour {nom_de_la_catégorie} Dimplex contempra ef KDS6401E. Dimplex contempra ef KDS6401E 16 pages. Dimplex - the glen dimplex group stove user's guide
Également pour Dimplex contempra ef KDS6401E : Manuel pratique de l'utilisateur (10 pages), Manuel de pièces et d'entretien (19 pages)
Imprimer la page
KDS6401E CONTEMPRA
If the stove was operating prior to servicing allow at least 10 minutes for light
bulbs and heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the
risk of electric shock or damage to persons.
TO REPLACE THE HEATER ASSEMBLY
1. Remove the stove pipe kit (if equipped).
2. Remove the four screws from the rear panel and remove.
3. Locate and remove the four screws on the inner heater panel.
4. Locate the eight cam locks on the side and front panels inside the upper
corners of the stove and turn with a large slot screwdriver so the triangle
on the cam lock is pointing up towards the top of the stove.
5. Grasp the top at both sides and gently pull to release the top.
6. Remove the heater mounting screws.
7. Disconnect the wiring clips and connections noting their original locations
and remove the heater assembly.
8. Properly orientate the replacement heater assembly and connect all of the
wiring clips connections in their original locations.
9. Reassemble in the reverse order as above.
16