Dimplex contempra ef KDS6401E Руководство по ремонту и обслуживанию - Страница 16

Просмотреть онлайн или скачать pdf Руководство по ремонту и обслуживанию для Плита Dimplex contempra ef KDS6401E. Dimplex contempra ef KDS6401E 16 страниц. Dimplex - the glen dimplex group stove user's guide
Также для Dimplex contempra ef KDS6401E: Практическое руководство пользователя (10 страниц), Руководство по ремонту и обслуживанию (19 страниц)

KDS6401E CONTEMPRA

If the stove was operating prior to servicing allow at least 10 minutes for light

bulbs and heating element to cool off to avoid accidental burning of skin.

Disconnect power before attempting any maintenance or cleaning to reduce the

risk of electric shock or damage to persons.

TO REPLACE THE HEATER ASSEMBLY

1. Remove the stove pipe kit (if equipped).

2. Remove the four screws from the rear panel and remove.

3. Locate and remove the four screws on the inner heater panel.

4. Locate the eight cam locks on the side and front panels inside the upper

corners of the stove and turn with a large slot screwdriver so the triangle

on the cam lock is pointing up towards the top of the stove.

5. Grasp the top at both sides and gently pull to release the top.

6. Remove the heater mounting screws.

7. Disconnect the wiring clips and connections noting their original locations

and remove the heater assembly.

8. Properly orientate the replacement heater assembly and connect all of the

wiring clips connections in their original locations.

9. Reassemble in the reverse order as above.