Dimplex XLS24N Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Dimplex XLS24N. Dimplex XLS24N 10 pages. Ultra-slim storage heaters
Également pour Dimplex XLS24N : Mode d'emploi (4 pages), Manuel d'instructions d'installation (8 pages), Mode d'emploi (4 pages), Manuel d'instructions d'installation (8 pages), Manuel d'instructions d'installation (8 pages)

Imprimer la page
Dimplex XLS24N Manuel d'utilisation

Seasonal settings

Summer
In summer when you hopefully don't need
1
any heat you can switch the heater off at the
wall socket. Turn it on again when you need
heating.
TIP Remember there will be a delayed reaction
from the heater until the beginning of the charge
period when you switch on again.
Preparing for colder weather
Remember to turn the heater on at
2
the wall switch.
• Allow 24 hours for the heater
to 'charge'.
• Adjust the controls as necessary.
• The INPUT control for XLS models should
not need to be seasonally adjusted.
TIP The INPUT control for XL (manual models)
should be set to max for Winter but a lower
setting should be sufficient during Spring and
Autumn. But if the heater is not providing the
correct level of heat it should be adjusted slightly
up or down as appropriate. Remember, any
changes will take 24 hours to take effect.
TIP If the external temperature falls below – 3°C
it is likely that you will need supplementary heating
to maintain the normal temperature in the room.
Holidays – Summer
In the summer the heater can be turned
3
off at the wall switch.
Holidays – Winter
In the winter set the controls as shown to
4
protect the room from frost.
TIP Remember to first switch on at the socket.
When you switch the heater on again it may need
a 'charge 'before heat is available. There may be
a delay of 24-48 hours before heat is available.
6
1224-XLN/XLSN STORAGE HEATER INSTRUCTIONS.indd 7
Summer
1
2
3
Output
(late boost)
4
OUTPUT
X
OFF
3
ON
X
OFF
Input
Output
(late boost)
INPUT
14/01/2011 10:36
Input