Pioneer DEH-P3370XM UC Manuel d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Pioneer DEH-P3370XM UC. Pioneer DEH-P3370XM UC 4 pages. Pioneer deh-p3370xm: install guide
Imprimer la page
Installation
DIN Rear-mount
Installation using the screw holes on the side of the unit
1. Remove the frame. (Fig. 9)
Frame
8
Insert the release pin into the hole in
9
the bottom of the frame and pull out
to remove the frame.
(When reattaching the frame, point
the side with a groove downwards
and attach it.)
2. Fastening the unit to the factory radio mounting bracket.
(Fig. 10) (Fig. 11)
Select a position where the screw holes of the bracket and
the screw holes of the head unit become aligned (are fitted),
and tighten the screws at 2 places on each side. Use either
truss screws (5 8 mm) or flush surface screws
(5 9 mm), depending on the shape of the screw holes in
.
the bracket
10
Factory radio mounting bracket
12
Fixing the Front Panel
If you do not operate the Detaching and Replacing the Front Panel Function, use the sup-
plied fixing screws and holder to fix the front panel to this unit.
1. Attach the holder to the front panel. (Fig. 12)
2. Replace the front panel to the unit. (Fig. 13)
Fig. 9
3. Fix the front panel to the unit using fixing screws. (Fig. 14)
Fig. 10
Screw
11
Dashboard or Console
13
Fig. 11
Installing the Tuner Unit
Mounting with Brackets (Fig. 15)
Fig. 12
Fig. 13
Fixing screw
Fig. 14
Tapping screw (4 12 mm)
Screw (4 6 mm)
Bracket
Car mat or chassis
Drill 2 to 2.5 mm diameter holes.
Fig. 15